DR. S. BOND WALL PUTTY

DESCRIPTION/ADVANTAGES: “Dr. S. Bond Wall Putty” is a water resistant white cement based putty which provides a strong base on concrete / mortarwalls (Internal and External) and Ceilings. It is applied before painting of thewall. It fills the fine pores ofthewalls and ceilings, thereby providing awhite, smooth and dry surface for painting.Being water resistant it provides a protective basewhich prevents expensive paint formaking. “Dr. S. BondWall Putty” has special added ploymers andmore adhesive strength which provides a strong base ensuring a longer life for the painted surface. It does not require water curing and it can even be applied on freshly plastered wall thus resulting in savings of time and cost. During repainting, the surface done upwith “Dr. S. Bond Wall Putty” requires minimum scrubbing thus eliminating themess of dust.

APPLICATION: After drying of first coat of Putty just rub the surface gently with wet sponge or very gently with the putty blade in order to remove the loose particles. Allow the surface to dry for at least 3 hours and then apply second coat of putty. Leave the surface to dry completely. After drying of second coat remove any type of marks with the help of moist sponge or rub the surface very gently with the putty blade. Leave the surface to dry, preferably overnight/ 10-12 hours. Always prepare are quired quantity of putty and use it within 2-3 hrs of mixing with water. The total thickness of the coats should be limited to maximum 1.5mm.

HOW TO USE: Mix “Dr. S. Bond Wal Putty” with 40-45% clean water slowly to make a paste. It is very important that water be added to putty to make a mix and not vice versa. Continue the mixing for 10-15 minutes till a uniform paste is formed. It is very important that the mixing of “Wall Putty” should be done thoroughly preferably with mechanical mixer. This will help in easy application, obtaining more coverage and smooth uniform shade. Only Prepare a quantity which can be used within 2-3 hours of mixing with water

PACKAGE: 25 kg and 40 kg Pack

COVERAGE: The coverage area of “Wall PUtty” on smooth normal mortar wall is 2 to 2.5 Sq.mtr/ Kg/mm in double coat. The coverage area, however will depend upon the quality of the substrate.

Copyright @ 2016 - Dr.S.Bond - All Rights Reserved